Download User Guide - Aurora Multimedia Corp.

User Guide
Videowall Setting
The Video-wall combines multiple display (RX) devices to show a complete video source. Select multiple display
devices in the scene setting interface, and combine the cells.
Follow these steps to configure the Video-wall, here we take a 2 x 2 scene as an example:
Preparation:
1.
Two Transmitters JPX-TX1
2.
Four Receivers JPX-RX1
3.
A Switch with PoE
4.
A HDMI source such as a Blue-ray DVD
5.
Four display devices
6.
Several HDMI cables and Ethernet cables
Hardware Connection:
Blue-ray DVD
Switch
Video Wall
RX1
TX1
RX2
TX1
RX1
TX1
RX2
TX2
RX3
TX2
RX4
HDMI Loopout
RX3
TX2
RX4
1.
Connect the Blue-ray DVD to HDMI IN port of TX1 with a HDMI cable, connect HDMI OUT port of TX1 to HDMI
IN port of TX2.
2.
Connect TX1 and TX2 to the Switch with Ethernet cables.
3.
Connect RX1, RX2, RX3, and RX4 to the Switch with Ethernet cables.
4.
Connect HDMI OUT port of RX1, RX2, RX3, RX4 to the display devices with HDMI cables.
5.
Power on all the devices
Note:
If the Switch doesn’t support PoE function, please remember to plug in the power adapters of
Transmitters/Receivers
18