Download The MODES User Guide v3

- Insert name of .MUT file or ‘Browse’ & Select
• Frame 2: Insert angle of sample to beam
• Frame 3: Select container ‘No’ or ‘Yes’. If ‘Yes’, a new window will appear for the can
parameters:
- Insert thickness of front and back
- Insert number density
- Insert name of .MUT file or ‘Browse’ & Select
For cylindrical geometry, perform the following operations:
• Frame 1: Select container option ‘No’/’Yes’
• Frame 2:
- Insert sample run number or ‘Browse’ & Select
- Insert sample inner radius, outer radius & number density (if sample is a solid cylinder,
r1=0, r2=outer radius)
- Insert name of .MUT file or ‘Browse’ & Select
• Frame 3: Insert beam width
• Frame 4: For annular geometry. Insert number of annuli. For standard IRIS/OSIRIS cells, insert
‘1’. Values of r1, r2 and r3 will be inner sample radius, outer sample radius and (outer sample
radius+2xcan wall thickness), respectively. If your container has more than one annulus, for
each annulus insert radius, number density and name of .MUT file or ‘Browse’ & Select and
28 | P a g e