Download BubbleBead User's Guide 3.1 - Absolute Koi-Koi Supplies

Pipe fitting sizes on inlet/outlets
If the filter should arrive damaged or with parts missing please contact your supplier immediately, and
confirm losses in writing within seven days to allow the problem to be corrected.
These vary according to what your dealer has specified but typically the
fittings are as follows:
Model
Inlet
BBF-1.5
1¼”
fem.BSP A
1¼”
fem.BSP A
1¼”
fem.BSP A
1½”
fem.BSP
1½”
fem.BSP
BBF-3
BBF-5
BBF-7
BBF-9
Top
Outlet/Return
1½” fem.solv. B
1½” fem.solv. B
1½” fem.solv. D
2” fem.solv.
2”/3” fem.solv. E
Waste
Outlet
2” male
BSP
2” male
BSP
2” male
BSP
2” male
BSP
2” male
BSP
Sediment
Drain
1½” fem.BSP
C
1½” fem.BSP
C
-
Notes:
solv. = Solvent Weld (pressure); BSP = British Standard Pipethread
A - This dismountable union has adaptors to 40mm hose or 1½” female BSP.
B - An optional adaptor kit is available with a 90degree outlet to either a
dismountable 40mm hosetail or a 1½” dismountable solvent union.
C - This outlet is plugged as standard. An optional valved sediment drain kit is
available.
D - An optional adaptor kit is available with a swept 90degree outlet to either a
dismountable 50mm hosetail or a 2” dismountable solvent union.
E - The top outlet size on the BBF-9 can be specified at the time of order.
Optional connectors are available for other outlets e.g. to adapt 2” male
BSP to socket solvent or dismountable 50mm hose
References and Sources quoted:
AST technical literature, and:
1
Malone, R.F., Beecher, L.E., 2000. Use of floating bead filters to recondition recirculating waters in
warmwater aquaculture production systems. Aquacultural Engineering 22: 57-73.
FILTER GUARANTEE
The filter manufacturer guarantees that the filter material and
workmanship are free of defects. The guarantee is valid for paid goods and
runs for one (1) year from the date of delivery.
Any filter returned to the dealer or distributor carriage paid, which is
proved to the manufacturer’s satisfaction to be faulty by reason of
defective material or workmanship will be replaced or repaired, at their
option, free of charge, provided it has not, in the manufacturer’s opinion,
been subjected to misuse, neglect or accident. In particular:
1) The filter should have been installed and maintained in accordance with
the instructions.
2) Excessive weight due to heavy pipes, valves, etc. should not be carried
by the inlets or outlets.
3) The filter hull pressure is at no time to be allowed to exceed the
maximum pressure rating as specified by the manufacturer.
The guarantee does not apply to filters used for other than the intended
purpose; those altered, repaired or modified by other than an authorised
repairer; or those used with other items where the integrity, performance
or safety of these items is affected. Damage by natural forces such as
storm, ice, or animal, is excluded from the guarantee.
The distributor and the filter manufacturer will not be liable for any direct
or consequential loss. Any claim made under this guarantee must be
accompanied by proof of purchase. This guarantee does not affect your
statutory rights as a consumer.
2
Malone, R.F., Rusch, K.A., 1998. Using the bead filter in your koi pond (Second Edition). Louisiana Sea
Grant College Program. 50pp.
Drennan, D.G., Golz, W., Ahmed, H., Malone, R.F., 1995. Clarification abilities of floating bead filters
used in recirculating aquaculture systems. In: Aquaculture Engineering and Waste Management,
Proceedings from the Aquaculture Exposition VIII and Aquaculture Mid-Atlantic Conference,
Washington, D.C., June 24-28, pp. 256-267.
49
If problems should arise, in the first instance contact your
local dealer or your nearest distributor (see page 51).
50