Download Lambda flat roof system Installation manual

The Lambda flat roof system is a robust mounting system
for PV modules on flat roofs. It consists of aluminium
triangles, aluminium support rails and all necessary
accessories for attaching the modules to the rails and
connecting the components to one another. Further
components such as roof fixation kits or back plates are
also available. With Lambda, both portrait and landscape
module mounting are possible.
1.2 Intended use
The Lambda flat roof system is to be used for the
roof installation of PV modules only. Any other use is
considered improper.
The observance of the information in these assembly
instructions is a part of proper use. Mounting Systems
GmbH is not liable for damage that results from the
non-observance of assembly instructions, in particular
the safety information, or from the improper use of the
product.
1.4 About this manual
Subject
This manual details the installation and assembly of
the Lambda flat roof system. The illustrations in the
manual show the portrait mounting procedure for
framed modules. Should landscape mounting differ
from portrait mounting, this will be clearly emphasised.
Some additional components that are repeatedly
used are also indicated. No description is included for
materials for special substructures that may be required
to accommodate the constructional conditions of the
building in addition to standard materials. These
are always specially manufactured and documented
separately.
User group
This manual is intended for qualified personnel with a
basic knowledge of mechanics, hand tools and mechanical
skills.
1.3 Standards and technical directives
When planned correctly, Lambda fulfills the following
standards and technical directives:
• Eurocode 9 — DIN V ENV 1999-1-1: Design of aluminium
structures
• DIN 1055 — Actions on structures: Basis of design, safety
concept and design rules
Introduction
1
Lambda Installation manual
1. Introduction
1.1 Short description