Download Installation Manual Turbec T100

Safety precautions
2.4 Machine safety device
2.4.1 Emergency stop button
Learn the position of the Emergency stop button in order to stop the
equipment in case of danger to people or damage to the equipment.
Pushing the Emergency stop button will reset the equipment and shut off the
fuel gas valves by a hard-wired loop thus stopping the engine. The electrical
power output will cease, as the main contactor between the power electronics
and the main circuit breaker will open.
The Emergency stop shall never be used for normal shutdown. Emergency
stopping may shorten the lifetime of the T100.
Note!
The picture shows a T100 P.
2.2T100s3_IMsp_rev02.fm
Note!
2.4.2 Extra emergency stop
The T100 is prepared for an extra wall mounted Emergency stop button. This
button is optional and should be located on a nearby wall. The function of the
extra Emergency stop button is the same as the Emergency stop button on
the T100.
Doc No. D12245-05
15