1
Download User's Manual
Transcript
248 Select abutting wall edges To define roof edges where the walls are located enter the hw, α, b1 parameters then click on the this icon to select the respective lines. Select parapet edges To define parapets enter the hp parameter then click on the second icon to select the lines. Abutting wall height [m] hw height of the abutting wall relative to the roof level Angle of the roof above the abutting wall α is the angle of the roof above the abutting wall. It determines the amount of snow falling from the higher roof. Width of the taller construction b1 is the width of the taller construction measured perpendicularly to the wall Parapet height hp is the height of the parapet or other obstruction relative to the roof level . Delete Edge properties can be deleted by clicking the delete icon and selecting the edges.
