1
Download User's Manual
Transcript
User’s Manual e6 321 Min/max only Writes the local min/max values only of the current result component to the nodes, lines and surfaces. my moment component Rz support force component After clicking the Miscellaneous Settings... button the following options are available: Result Smoothing Parameters Intensity Reference Value Cut moment peaks over columns None The values of the internal forces of the surface elements computed at the nodes are not averaged. Selective The values of the internal force components of the surface elements computed at the nodes are averaged in a selective way, depending on the local coordinate systems, the support conditions and the loads of the elements that are attached to a node. All The values of all internal force components of the surface elements computed at the nodes are averaged. Lets you display the variation of the current internal force component within the surface elements in a filled color contour plot form. The numerical values are displayed if a Show Value Labels On option is enabled. See... 6.1.9 Surface element internal forces If the mesh on a domain was created with the option Adjust mesh to column heads moment peaks can be averaged and cut over column heads by activating this option. See... 6.1.9 Surface element internal forces
