Download SMART-AG User Manual

A.2
SMART-AG Specifications
INPUT/OUTPUT CONNECTORS
SMART-AG COM/PWR
+8 to +36 V DC at 2.5 W (typical while logging) a
For the cable pinouts and drawings, see Section A.2.1, SMART-AG
Power/Communications Development Kit Cable (01018256) starting
on Page 61
Serial Com Ports
RS-232 F Compliant (Rx and Tx signals only)
CAN
SAE J1939/ ISO 11783/ ISO 11898 Compliant
Emulated Radar Output
High= Supply Voltage -0.5V Minimum
Low= 0.5V Maximum
Load= 3K Ohm Minimum
PPS Output
3.3 V CMOS Logic Compatible
MKI Input
3.3V CMOS Logic/ 5V Tolerant
INPUT/ OUTPUT CONNECTOR PROTECTION
Electrical Conducted/
Coupled disturbance
tolerance
ISO 7637:2002 (Survives all pulse types)
LED INDICATORS
More details can also be found in Section 2.2.2, Status Indicators starting on Page 25
PHYSICAL
Size
155.3 x 66.8 x 155 mm b
Weight
495 g maximum
ENVIRONMENTAL
Operating Temperature
-40C to +75C
Storage Temperature
-55C to +90C
Humidity
Not to exceed 95% non-condensing
Immersion
MIL-STD-810F Method 512.4 Procedure 1
Vibration c
Random
Sinusoidal
Shock
MIL-STD-810F Method 514.5 C17
IEC 68-2-6 ASAE EP455, 5.15.2 Level 1
MIL-STD-810 F Method 516.5
a. When tracking GPS satellites.
b.
denotes diameter, here and in the Dimensions graphic on Page 60.
c. See also the Notice section of this manual starting on Page 13.
SMART-AG User Manual Rev 5
59