Download User Manual - CCL Computers

Connect to Wi-Fi Access Point (Bridge Mode)
To enable StoreJet Cloud to connect to the Internet through an external
wireless access point, select Wireless Settings then Connect to Wi-Fi
Access Point:
1.
2.
Bridge Mode: Select ON to enable the function.
SSID: Press Site Select to view available wireless access points to
connect to.
Method: Wireless Security Mode section, select Disable, WEP, WPA, or
WPA2.
4. Key: Enter the Wi-Fi access point security key.
5. Select Apply and confirm the action by pressing OK.
StoreJet Cloud will finish configuration for access point and reboot after 30
seconds.
3.
IMPORTANT: Please do NOT interrupt StoreJet Cloud
configuration. Any interruption during the process may cause
unexpected results.