Download User's Manual
Transcript
5250 Params Usr Defined HTRN This option is used to set user defined lead-in characters. The range is ASCII character. This option allows users to define ther own lead-in characters for the OKI Specific commands. Select a hex value for the following codes for the User Defined option: • • • Start Code 1 5F (default) Start Code 2 5F Stop Code 5B Alt. Set 80-9F • Printable (default). Prints data in the range of hex 80 through hex 9F. • Control Code. Interprets data in the range of hex 80 through hex 9F as a control code. Graphic Chek Err Allows overriding of the host setting for the SGEA (Set Graphic Error Action) command. For more information about the SGEA command, refer to the Coax/Twinax Programmer's Reference Manual. • Enable (default). The host setting for the SGEA used by the printer. If the SGEA command is requested to stop on graphic errors, the printer will stop when a graphic error is detected. • Disable. Ignores the SGEA command from the host. The printer does not stop when an error is detected; instead, it substitutes the character selected in the Graphic Chek Code parameter. 197
Related documents
Printronix P7000 Printer User Manual
P7000 Cartridge Ribbon Printer User`s Manual
Digital Equipment Corporation LG06 User`s manual
P7000 Cartridge Ribbon Printer User`s Manual
User`s Manual
Printronix T4204 User`s manual
Digital Equipment Corporation LG06 Specifications
User`s Manual - CNET Content Solutions
LineJet™ series
Printronix P5000 User`s manual
Service Manual
Printronix L5535 User`s manual