1
Download User's Manual
Transcript
PCL-II Epson FX Emulation PCL - II Emulation * = Factory Default EMULATION (from page 164) PCL-II Primary Char. Set Second Char. Set ID ID 0* - 109, xx Symbol Set See next page Pitch 10*, 12, 13.3 Density Data Processing* NLQ OCR-A OCR-B High Speed 0* - 109, xx Symbol Set See next page Pitch 10*, 12, 13.3 Density Data Processing* NLQ OCR-A OCR-B High Speed Symbol Set Delay Disable* Enable PTX Linefeed Disable* Enable Graphics Density 60 DPI* 70 DPI LPI Adjust 6 LPI* 8 LPI Page Length Rep. Max Line Width Inches/Page* Lines/Page 13.2 inches* 13.6 inches Perforation Skip Disable* Enable Display Functns Disable* Enable Page L./Lines Page L./Inches 66 Lines* 12 - 96 Lines 11.0 Inches* Face CPI Delay Enable* Disable Line Terminator LF After CR CR After LF CR After FF CR After VT 261
