Download Remote Lighting Controller FEC Type: HP0656/7/8 User Manual

FEC Remote Lighting Controller HP0656
User Installation and Operation Manual
6.6.6 System Utilities
This option allows the operator to:
1) Configure the Meteorological Pack (MetPak) parameters
2) Restore all of the factory set default values, and
3) Set the ID number of the unit
Meteo Parameters
The Meteo option allows the height of the meteorological station to be defined and, to cater for
the wide variety of parameters used worldwide, the units the meteorological data will be
presented in to be set.
The altitude cannot be changed by SMS command but the reporting units can.
Restore Factory Defaults
This option puts the configuration back to the factory default. The default values are listed in
the appendix.
WARNING – All entered telephone numbers, radio settings etc. will be lost
Unit ID
A four digit number between 0000 and 9999 can be entered to identify this unit. This identifier
is prefixed to all outgoing SMS messages to identify the source.
Version 1.0 Issue 6
© Interleader Ltd 2014
05 July 2014
Page 37 of 58