Download Dolphin user Manual

Transcript
5.2.1.12. Equipment Checks
The correct procedure for managing equipment checks is to set up the required subrecords. These
stages must be completed to enable the addition of an item of equipment that uses a particular
equipment type.
When the Equipment Checks Record is first entered Dolphin requests the serial number, description
and equipment type. Dolphin will then automatically schedule each test in the Group for that day.
When each test is completed Dolphin reschedules the next test.
Select the Equipment Check record and the following window will appear:
The User should select the required equipment check by highlighting and double-clicking on the
record. This will bring up the following window in which a record of the results of the test
conducted may be recorded.
Dolphin Version 2.3.1031.2
5-59
7 June 2007