Download User Manual - Sound

5.2. Principles of operation with html pages
The picture below shows a typical page.
On top you find a bar of tabs corresponding to the various categories of functions and parameters for
the SCOOP 5. Clicking a tab you access either a page, or a drop-down list for selecting a secondary
page. These tabs and pages are detailed in the following chapters.
Under the bar can be found the information and adjustable parameters, with various selection or entry
modes for these parameters, grouped in blocks (each surrounded with a frame). On the right side, a
text area provides additional help and hints.
As a general rule, the displayed parameters are read when accessing the page, and are not refreshed
automatically1. To force a refresh, click the
refreshed.
icon: the data in the area or frame are read and
L Exception: some data on some pages is however periodically and automatically refreshed. This
makes a modest bit rate, but you should exit the html pages if you want no traffic at all on the path
between SCOOP 5 and the control device.
Two tabs have a specific behavior:
x
x
´Statusµ is accessible without a login and some data are updated automatically.
´AlarmsµLVDOVRXSGDWHGDXWRPDWLFDOO\DQGVZLWFKHVWRUHGZKHQDQDODUPWULJJHUVVKRZLQJ
the number of issues detected. You can then check for details by clicking the tab.
Access to the tabs (other than ´6WDWXVµUHTXLUHVORJJLQLn beforehand. If you click a tab without being
logged in, the login dialog box opens to allow you to enter the connection password. If it is blank, just
FOLFNWKH´/RJLQµEXWWRQ
1 This is on purpose, in order to avoid a permanent high rate of queries to the unit, which may be questionable in some situations.
SCOOP 5 - User Manual
85