Download User Manual - Sound

LL Parameter
LL 1
LL Parameter
Active Interface
LL 2
Notes: Interface: select the X24/V11 used for transmission; interface 1 is the default interface.
ISDN Parameter
This sub-menu is not available on versions with no active ISDN interface.
Euro ISDN
Protocol
NI-‐2
Local Number 1
NTT
Local Number 2
Local Number 3
RNIS
Parameter
Local Number 4
Sub-‐address 1
Sub-‐address 2
Sub-‐address 3
Sub-‐address 4
SPID
Codec Mode
Single Codec
Double Codec
Notes:
x
Protocol: NI-2 is used in North America, NTT is the protocol of the Japanese operator NTT,
and Euro ISDN (or ETSI) can be used in the majority of the other countries (see more details
on page 9, Network protocol).
x
Local Number and Sub-­address: these settings are irrelevant for the NI-2 protocol. Their
meaning and use is detailed further, page 66, in 4.5.1, Setting up a link in ISDN mode.
x
SPID: this setting only applies to the NI-2 protocol, and is not presented for the other
protocole. See page 66, in 4.5.1, Setting up a link in ISDN mode, more about this setting.
x
Codec Mode: selection of either the normal ´single codecµ mode or the ´Double codecµ
mode. In this latter case, it may be important to set a distinctive local number + sub-address
combination for each of the two first channels. This is detailed page 68, in 4.5.2, Setting up
links in double ISDN codec.
SCOOP 5 - User Manual
53