Download USER MANUAL

21
5.2.3
Trigger auto tab
This tab allows the modification of the default parameters for advanced recognition.
Refer to § Chapter 7: Automatic measurement type recognition for more information.
Please note that the modification of these parameters can alter the automatic recognition
process; it is therefore necessary to perfectly understand the mechanism before making any
change.
Event # : 5 events are activated and cannot be deleted
Code : 5 codes are defined; one for each event
Fast logging: always Yes
Logic for triggers: And or Or; if several triggers are defined
Trigger # : number of the trigger
Trigger type : selection of the data to be used for trigger
Start trigger [dB]: level for trigger start
End trigger [dB]: level for trigger stop
Pre-trigger [Sec]: buffered time before trigger starts
Post-trigger [Sec]: minimum delay before trigger stops
Minimum time duration [Sec]: minimum duration for a trigger to start
End duration [Sec]: time duration after end trigger level to stop the trigger
5.2.4
Signals tab
Audio signal sampling frequency [kHz]: selection of the audio sampling frequency;
selectable among 51.2; 25.6; 12.8; 6.4; 3.2 and 1.6 kHz. Default value is 12.8 kHz
Audio recording with measurement: No or Yes; default is Yes (only if option A is active)
Brand of ACOEM