Download USER MANUAL

69
 Source type: for insulation only: to distinguish between excitation made by a noise source
or directly by the traffic noise (for façade insulation)
 Source: editable fields in Test Result items
o Building: repeats automatically the location of the DUO/FUSION data structure.
o Floor, apartment and room: can be edited by the user and are reported in the
report
The information is copied in
o Level source AVG
o all Level source measurements
 Receive: editable fields in Test Result items
o Building: repeats automatically the location of the DUO/FUSION data structure.
o Floor, apartment and room: can be edited by the user and are reported in the
report
The information is copied in
o Level Receive AVG
o Impact noise AVG
o Background noise AVG
o Reverberation time AVG
o all Level reception measurements
o all Level impact
o all Background noise
o All reverberation time
 Equipment: editable field in Level equipment Test result line
The information is copied in
o Level equipment AVG
o Level equipment measured data
 Partition m²: editable field in Test Result items: to be used when the calculation method
requires the surface of the device under test
 Volume m3: editable field in Test Result items: to be used when the calculation method
requires the volume of the receiving room under test
 Target: editable field in Test Result items for use to compare a result when a target is
required (maximum value for impact noise, minimum value for the other test results)
 Result: rated calculated value
 Difference: difference between the target value and the measured rated calculated value
 Compliance:
o C: compliant
o CT: compliant with tolerance
o NC: not compliant
 Comment: information when an indicator is not fulfilled (refer to §10.4 Background noise
correction for more information).
Brand of ACOEM