Download USER MANUAL - Security Dynamics

TM
X-SERIES USER MANUAL
DVR
RV-DOME
RV-DOME
UN-TERMINATED
UN-TERMINATED
PSU
PSU
RV-DOME
TERMINATED
RS 485
DAISY CHAIN
PSU &
ALARM MODULE
TERMINATED
(B) ) If the Camera and Alarm Module is NOT the last in line, the Camera should be terminated and the Alarm Module unTerminated. The Alarm Module takes over the termination from the Camera i.e. it (the Alarm Module) should be unterminated!
RV-DOME
UN-TERMINATED
DVR
RV-DOME
TERMINATED
RV-DOME
UN-TERMINATED
RV-DOME
TERMINATED
RS 485
END OF LINE
DAISY CHAIN
PSU &
PSU
5
ALARM MODULE
UN-TERMINATED
PSU
PSU
WIRELESS ALARM CARD (WIRELESS PIR DETECTOR)
WARRANTY & SAFETY NOTICE: DISCONNECT ALL POWER BEFORE OPENING OR WORKING ON
THE POWER SUPPLY UNIT AND ALARM CARD. WIRELESS ALARM CARDS SHOULD NOT BE HOT
SWAPPED OR INSTALLED WHILST THE POWER IS LIVE. INSTALLATION MUST BE CARRIED OUT
BY A SUITABLY QUALIFIED PERSON.
5.1
FACTORY FITTED WIRELESS CARD (RV-PSU-ALM16-W)
The Redvision Wireless Card is compatible with the Redvision Wireless PIR, Luminite Genesis Range and the Redwall
Wireless Transmitter Module Part Code WF434T, (wireless enables Redwall PIRs).
This PSU is compatible with the following RVX SERIES PTZs:
RVX18, RVX18-IR, RVX18-W, RVX18-IR-W, RVX28, RVX28-IR, RVX28-W, RVX28-IR-W.
Refer to 4.2 for RVX-PSU INTERNAL CONNECTIONS & 4.3 for ALARM MODULE DIP SETTINGS.
5.1.1
CONFIGURING WIRELESS ALARM MODULE
ALARM INPUTS
The RVX-PSU-ALM16-W has 16 Alarm Inputs. These can either be used as either HARDWIRED or WIRELESS Alarm Inputs,
or a combination of both, e.g. 8 HARDWIRED & 8 WIRELESS.
12