Download User's manual

english
2. Clock Set
The clock normally needs to be adjusted before the race starts. For this
reason, when Bora is switched on, 0:00 appears on the top right corner
of the display.
+
Please note that no clock adjustment is needed if you only wish to program
the timer. The exact time is only necessary during the development of the
race.
Two clock adjustment procedures are possible, depending on whether a
synchroniser is available or not:
1. Manual adjustment: The clock is set and started manually;
synchronisation must then be checked, and corrections carried out if
necessary.
2. Electronic adjustment: The clock is set by means of a “synchroniser”
Manual Setting
Choose 1 from the main menu, and thereby enter the clock adjustment
function. The display will appear as follows:
CLOCK ÐÑ=set
0§01'15"
Press the CLOCKS S key to carry out the clock setting. The new clock
setting will then be requested:
NEW TIME:
ƒ0§02'00"
ÐÑ:from Syncro
Clock Set
5