Download JNEye User Guide

2-132
UG-1146
2015.05.04
JNEye Channel Designer
•
•
•
•
•
Ideal transmission line
Via model based on composite transmission line blocks
Shunt and series capacitance
Series inductance
S-parameter model
A channel design can include one or multiple channel components. JNEye Channel Designer can
combine and generate Touchstone S-parameter models that can be used in link simulations. JNEye
Channel Designer provides user friendly and integrated interfaces. The channel components and resulting
channel models can be observed and analyzed using embedded plot functions or the JNEye Channel
Viewer.
In the 15.0 JNEye release, a 2-port single-ended channel model will be generated internally for all of the
above components except the S-parameter model.
After the single-ended model is generated, JNEye Channel Designer converts it into a 4-port differentialpair format by assuming that these two single-ended channels are uncoupled. Channel cascading of all
channel components, which include S-parameter channel components, are done in the 4-port level.
Starting the JNEye Channel Designer
You can start JNEye Channel Designer in two ways:
• Double-click JNEye_Channel_Designer.exe
• Click Channel Designer in the JNEye Control Module
The JNEye Channel Designer’s graphical user interface is shown in the following figure.
Altera Corporation
Functional Description
Send Feedback