Download M22 / M23 / M23G AT Command User Guide

mnemonic: PRI-MPS)
4: Another document next (T.30 mnemonic: PRI-EOM)
5: No more pages or documents, procedure interrupt requested (T.30
mnemonic: PRI-EOP)
Informative examples
+FET: 2
Transition to Voice +FVO
Response
Possible command(s)
+FVO
Description
FVO indicates that a procedure interruption has been negotiated, and the session
has been suspended; the DCE remains off-hook. (The FCLASS parameter is
unchanged.) This response is generated if either the local DTE initiated a procedure
interrupt (8.3.3.8/T.32, 8.3.4.8/T.32), and the remote station agreed, or if the remote
station requested a procedure interrupt, and the FIE parameter was set. If the remote
station requests a procedure interrupt during document reception, the DCE issues a
FVO response after the DTE issues the next FDR command with the FPS
parameter set to accept the request.
The DTE should respond to a FVO message by suspending the session, and
waiting for the operator or application process to determine if the session should be
resumed or terminated.
Defined values
Informative examples
Call Termination Status +FHS
Response
+FHS:<hsc>
Possible command(s)
ATD
ATA
©2006 BenQ Corporation.
AT Command User Manual
Confidential Property
178
Version: 1.7.7 20/09/2006