Download M22 / M23 / M23G AT Command User Guide

Transcript
$AUVOL?
$AUVOL: (list of current <volume>)
OK
Description
This command is used to control speaker volume. Note that this command has to be
used after audio path is configured by AT$AUPATH.
Defined values
Listing the parameters and defining the values
Volume: 0-5
0: Mute
1: Minimum Volume
5: Maximum Volume
Informative examples
-Initial the HyperTerminal
-Initial the MS
-AT Command
AT$AUPATH=3,1
$AUPATH: 1
OK
/* set volume */
AT$AUVOL=3
$AUVOL: 1
OK
2.6.7 Audio AEC $AUAEC
Table: $AUAEC parameter command syntax
Command
Possible response(s)
$AUAEC = <AEC_value> OK
$AUAEC?
$AUAEC: <AEC value>
©2006 BenQ Corporation.
AT Command User Manual
Confidential Property
249 Version: 1.7.7 – 20/09/2006