Download MATCH User's Guide - Datacolor Industrial

•
•
•
Correction Input State. You have measured a trial sample, but you have not yet
performed a correction.
−
If you select Save as recycle at this point, the trial formula is saved as
the recycle formula, and the trial sample measurement is stored as the
recycle measurement.
−
If the trial sample represents material that is ready to be used as
recycle, Save as recycle here eliminates the need to re-measure at a
later time.
−
This procedure assumes that the batch will not be altered further in
production, and this sample measurement accurately represents the
recycle when the production run is completed.
Correction Output State. You have completed a correction.
−
If you select Save as Recycle at this point, the trial formula is stored as
the recycle formula, and the trial sample measurement is stored as the
recycle sample.
−
This case retains the same logic applies to Correction Input State.
Manual Formula Input. You have manually entered a formula into the Formula
Central grid, and measured the formula sample as the trial.
−
If you select Save as recycle at this point, the input formula is stored as
the recycle formula and the trial sample measurement is stored as the
recycle sample.
Naming Recycles
When you save a recycle, you have the option to assign a name to the recycle data
object. This data object includes a name, a sample measurement and a formula.
To assign a custom name:
1.
In Formula Central, select File Menu, Save As Recycle. A submenu
displays:
Datacolor MATCHPIGMENT
Applications Technology • 497