Download USER MANUAL

Fitting SD memory card accessory
Step 1.
Remove the power cable from the instrument. Turn the
instrument over and place onto a soft surface, for example a
folded up towel, remove cap head screws from the positions
indicated using the Allen key provided.
Step 2.
Turn the instrument back over and lift the
accessory cover vertically upwards to
remove. Remove the tie-wrap from the
cable.
Step 3.
Plug the accessory cable into the SD memory card PCB module.
Step 4.
Note the slots in the base of the case. The two lugs on the
SD memory card PCB module plug into these
Version 5.4 18/4/2011
Page 69
Picodrop Ltd.