Download Wiztune User Guide

NET_SYNC_FLUSH
Keywords
Network
Purpose
If set to YES, internal network flush function will wait
until all network messages will be sent to remote
station. Used for advanced network tuning
Value Type
YES/NO
Default Value
NO
Value 1/ min
Value 2/ max
Restart required
YES
NET_USE_CONNECT_PRIORITY
Keywords
Network
Purpose
This parameter is used to define the order in which
stations will connect each other. ASC – means lower
station ID will connect to higher station ID. DSC –
vice versa. Used for advanced network tuning
Value Type
ASC/DSC
Default Value
Not set
Value 1/ min
Value 2/ max
Restart required
YES
Wiztune User Guide – Wizcon Supervisor