1
Download Command Line User's Guide
Transcript
AT-S63 Management Software Command Line User’s Guide username or name Specifies the username for the switch port. The parameters are equivalent. The port sends the name to the authentication server for verification when the port logs on to the network. The username can be from 1 to 16 alphanumeric characters (A to Z, a to z, 1 to 9). Do not use spaces or special characters, such as asterisks or exclamation points. The username is case-sensitive. password Specifies the password for the switch port. The port sends the password to the authentication server for verification when the port logs on to the network. The password can be from 1 to 16 alphanumeric characters (A to Z, a to z, 1 to 9). Do not use spaces or special characters, such as asterisks or exclamation points. The password is case-sensitive. Description This command sets ports to the supplicant role and configures the supplicant role parameters. This command also removes port-based access control on a port. Examples The following command sets ports 4 to 6 to the supplicant role: set portacess port=4-6 role=supplicant The following command sets port 8 to the supplicant role, the name to “switch22,” and the password to “bluebird”: set portaccess port=8 role=supplicant name=switch22 password=bluebird The following command removes port-based access control on ports 12 and 15: set portaccess port=12,15 role=none Section VIII: Port Security 743
