Download Stellaris Peripheral Driver Library User's Guide
Transcript
USB Controller Prototype: void USBIntDisableControl(unsigned long ulBase, unsigned long ulFlags) Parameters: ulBase specifies the USB module base address. ulFlags specifies which control interrupts to disable. Description: This function will disable the control interrupts for the USB controller specified by the ulBase parameter. The ulFlags parameter specifies which control interrupts to disable. The flags passed in the ulFlags parameters should be the definitions that start with USB_INTCTRL_∗ and not any other USB_INT flags. Returns: None. 24.3.2.48 USBIntDisableEndpoint Disable endpoint interrupts on a given USB controller. Prototype: void USBIntDisableEndpoint(unsigned long ulBase, unsigned long ulFlags) Parameters: ulBase specifies the USB module base address. ulFlags specifies which endpoint interrupts to disable. Description: This function will disable endpoint interrupts for the USB controller specified by the ulBase parameter. The ulFlags parameter specifies which endpoint interrupts to disable. The flags passed in the ulFlags parameters should be the definitions that start with USB_INTEP_∗ and not any other USB_INT flags. Returns: None. 24.3.2.49 USBIntEnable Enables the sources for USB interrupts. Prototype: void USBIntEnable(unsigned long ulBase, unsigned long ulFlags) Parameters: ulBase specifies the USB module base address. 384 January 11, 2011
Related documents
Stellaris Peripheral Driver Library User's Guide
Stellaris Peripheral Driver Library User's Guide
Stellaris Peripheral Driver Library User's Guide
Stellaris Peripheral Driver Library User's Guide
Getting Started with Stellaris ARM Cortex-M
LM3S9B92 ROM User's Guide
SYS`l`EMASTER User Manual Sacramento, C~lifornla, USA
Configuring the SPAN-SE for HYPACK Integration
Stellaris Brushless DC Motor RDK Software Reference Manual
Scheda Relè per UCP
HLK-M30 User Manual V1.2
MachZ Phoenix BIOS User`s Manual Supplement - Tri