Download Stellaris Peripheral Driver Library User's Guide

Transcript
USB Controller
Prototype:
void
USBIntDisableControl(unsigned long ulBase,
unsigned long ulFlags)
Parameters:
ulBase specifies the USB module base address.
ulFlags specifies which control interrupts to disable.
Description:
This function will disable the control interrupts for the USB controller specified by the ulBase
parameter. The ulFlags parameter specifies which control interrupts to disable. The flags
passed in the ulFlags parameters should be the definitions that start with USB_INTCTRL_∗
and not any other USB_INT flags.
Returns:
None.
24.3.2.48 USBIntDisableEndpoint
Disable endpoint interrupts on a given USB controller.
Prototype:
void
USBIntDisableEndpoint(unsigned long ulBase,
unsigned long ulFlags)
Parameters:
ulBase specifies the USB module base address.
ulFlags specifies which endpoint interrupts to disable.
Description:
This function will disable endpoint interrupts for the USB controller specified by the ulBase
parameter. The ulFlags parameter specifies which endpoint interrupts to disable. The flags
passed in the ulFlags parameters should be the definitions that start with USB_INTEP_∗ and
not any other USB_INT flags.
Returns:
None.
24.3.2.49 USBIntEnable
Enables the sources for USB interrupts.
Prototype:
void
USBIntEnable(unsigned long ulBase,
unsigned long ulFlags)
Parameters:
ulBase specifies the USB module base address.
384
January 11, 2011