Download USER'S MANUAL

FOREWORD
FOREWORD
Information included in the following manual are indicated to a qualified installer able to integrate the
equipment in a system, accomplishing with all the protection systems required from internationals rules and
local legislations.
Following manual is referred to an Ulyxe™ system and its dedicated software Ulyxe Editor in Class 4
configuration.
The manual has been prepared in conformance with the requirements of Directive 2004/108/EEC and
subsequent modifications and integrations and is composed of:
•
Safety regulations for use and maintenance
•
General machine specifications
•
Machine installation
•
Operating modes
•
Repairs and adjustments
•
Electrical and mechanic diagrams
Personnel assigned to operating the machine, in addition to being professionally trained for their specific job
must read the manuals, pay careful attention to safety regulations and the sections pertinent to their job.
Individuals assigned to operating the machine are broken down as follows:
• OPERATOR
assigned to loading the elements to process, visual inspection of the work cycle, unloading of finished
product and cleaning of the machine.
• MAINTENANCE PERSONNEL
assigned to electrical and mechanical maintenance of the machine.
NOTE:
Datalogic Automation S.r.l. shall not be held responsible for any non conforming use of equipment
of its manufacture.
NOTE:
BEFORE INSTALLING AND USING THE LASER, READ CAREFULLY THE CHAPTER
CONCERNING LASER SAFETY “APPENDIX A”.
ii
ULYXE™ – User’s Manual