Download BioTrends™ User Manual

BioTrends™ User Guide
Environmental Monitoring Software System
4.1.4
1)
2)
Disabling a user
Select the desired user
Click on the option [Disable] from the User Management window menu (Fig. 9); the user will be disabled, and will no
longer be able to access the application.
4.1.5
1)
2)
Enabling a user
Select the desired user
Click on the option [Enable] from the User Management window menu (Fig. 9); the user will be reinstated, and will be
able to access the application again.
4.1.6
1)
2)
Deleting a user
Select the desired user
Click on the option [Delete] from the User Management window menu (Fig. 9); the user will be deleted, and will no
longer be able to access the application. In addition, it will not be possible to define a new user with the same user ID.
4.1.7
1)
2)
Password reset
Select the desired user
Click on the option [Change] from the User Management window menu (Fig. 9); the window to change the selected
user data will be displayed
Click on the [Reset password] key
Enter the new password
Reenter the new password to confirm it
Enter the reason and press save
3)
4)
5)
6)
4.2 Basic Data Input
In order for BioTrends to achieve its goal, it is necessary to enter all the necessary data for saving the sampling results and for
analyzing such results.
(Example: In order to save a surface sampling result, it will first be necessary to define in BioTrends the sampling point, the
production department, the department area and the room within the area in which it is located, its class, acceptance levels, etc.
The sampling will be performed by a person [operator], the result will be read by an Analyst and Approved by a manager.
Therefore, it will be necessary to introduce in BioTrends the list of operating personnel. )
Figure 14: Data Lists
Nome File: BioTrends 2.3 User Guide.docx
23/104