Download User's Manual

APPLIED OPERATIONS/Viewing Images Following the Progress of Time
<Loop> button
<Z/T series switch> button
Successive display or frame-by-frame display is repeated
in the same direction.
<Set start position> button
When successive display or frame-by-frame display is
required, set the image with which the display should
start. (“0” is set when this button is not used.)
<Set end position> button
<Loop/Bound switch>button
<Display> button
Set the speed of successive display.
±±±
When successive display or frame-by-frame display is
required, set the image with which the display should
end. (Assuming that the number of images is n, “n-1” is
set when this button is not used.)
<XYZ series> button
Displays one of multiple images by selecting
it according to the multiple sections (Z).
<XYT series> button
Displays one of multiple images by selecting
it according to the time (T).
<Bound> button
Every time successive display or frame-by-frame display in a direction ends at
the start or end position, the display is restarted in the opposite direction.
<Display> button
Press to start display of n-slices of image from the start position to the end position
sequentially (successive display) or one by one (frame-by-frame display) or to stop
successive display.
Holding the button displays image slices in successive display and clicking it displays
image slices by advancing frame-by-frame.
<Rabbit> button
Press for successive display of image slices without pause.
<Clock> button
Press for successive display of image slices at the time interval set in the [Time Series] button.
<Turtle> button
Press for successive display of image slices at an interval of 0.8 sec.
<Display> button
Press to start display of n-slice of image from the end position to the start position sequentially
(successive display) or one by one (frame-by-frame display) or to stop successive display.
Holding the button displays image slices in successive display and clicking it displays image slices by
advancing frame by frame.
Page
2-221