Download Valhall Operators Manual

Transcript
Controls – Basic mode
The AGR4 basic mode provides simple control of the grain/noise
reduction without sacrifying the basic. Access by selecting menu AGR4
> Basic Controls.
Processing
Tick the checkbox to enable AGR4 processing.
Mode
The Mode selection should be set according to how the original material
was captured. Select Video for interlaced video material and Film for
film originated material. In case of progressive video material, set Film
Fine.
Strength
The amount of grain/noise reduction is automatically set-up in the basic
mode. Use the strength to trim the grain/noise reduction.
Out Mix
Sets the mix between the processed signal and the input signal. This
makes it possible to mix in some of the original grain into the processed
picture for a better film look.
Freeze
The freeze control does a frame freeze useful to capture the effects of
grain/noise reduction.
122 • AGR4 ME, Adaptive Film Grain & Noise Reduction
User's Manual