Download Valhall Operators Manual

An event that has been selected by the user will have a red border (also
called a list cursor).
Note! Right-clicking on an event in the event list will also recall and
execute its parameters.
Double-clicking on an event will cue up the connected source machine
to the associated timecode. If the event is active on field 2, the machine
will be positioned at field 1 one frame later.
The Event information
The information given at each event is as follows:
Event number
The event numbers are automatically rippled as new events are entered.
Timecode
The timecode associated with the event. Field 2 is indicated with an
asterisk (*).
Scene
Scene/cuts are indicated with a pair of scissors. This is done
automatically when the autoshot detector creates a new event.
Field-dominance.
Indicates the field dominance (F1/F2) in 50Hz/25fps or 60Hz/30fps
film originated material. In 60Hz/24fps film originated material, the
field in the 3:2 pull-down sequence is displayed as A1, A2, B1, B2, B3…
Film/Video
A film frame indicates film originated material, while the diagonal
stripes indicate video originated material. A film frame with a diagonal
cut tells you that that the 3:2 is discontinued.
Comment:
Shows the text entered after pressing F2 on the keyboard. Events can
be found, in the Search menu, by their comments.
Tip! To change the list layout and amount of information shown, go to the List
layout page in the User Profile.
12 • List Management
User's Manual