Download PHANTOM Omni User Guide

2 INSTALLING THE PHANTOM OMNI DEVICE
Connecting the PHANTOM Omni Device
Windows 2000 Users
7
Click Next.
8
You will see the “Install Hardware Device Drivers” window indicating that it
has found the SensAble Technologies device. Choose Display a List of the
Known Drivers for This Device, then click Next. (If you do not see this
message, check to ensure that the device cables are plugged in correctly and
that, if applicable, your FireWire card is installed properly).
9
In the “Select a Device Driver” window, you will see “Support for SensAble
Technologies 1394 PHANTOM Devices.” Make sure “Show compatible
hardware” is selected and click Next.
10 On the Start Device Driver Installation window, click Next.
11 A dialog will appear informing you that a digital signature was not found. Click
Yes to continue with the installation. Click Yes again.
12 If you have already installed the PDD, on the Insert Disk dialog click OK.
13 On the Files Needed dialog, browse to <SensAble Install Directory>/
PHANTOM Device Drivers/1394/PHANTOM_1394.sys. Click Open. Then
click OK.
14 You should see a window that says “Completing the Found New Hardware
Wizard.” Click Finish, and the process is complete.
PHANTOM Omni User’s Guide
15