Download User Guide Terrameter LS

ABEM Terrameter LS
4.1
The Data Storage
The Instrument/Storage View (Figure 30) shows information about the data storage.
Figure 30. Information view for data storage
4.2
The Network
While working with the instrument in the office it will normally be connected to a
network with a DHCP-server. The IP number given to the instrument will be
displayed on the “Instrument/Network” View (). Two IP numbers may be displayed.
The first is assigned for use in the local network. The local network address is labelled
“eth0:” and is needed for establishing communication to the instrument via a network
connection using the Terrameter LS Utility Software (see chapter 8). The second is
only displayed if a connection can be established with ABEM‟s remote technical
support site via VPN, Virtual Private Network (see section 9.4 Remote Diagnostics).
29