Download DVPlay system - User Guide

6.3 Add TimeTables to the Time Event module
The Time Event module is an actual DVPlay module which reads TimeTables and sends its command to
the software. The module reads all Active timetables and loads it for execution for current day at 00:00:00.
Add TimeTable to the TimeEvent module is done automatically every day after midnight. If you want
commands to be loaded manually you can read this chapter. The manual loads of the commands can be
used for testing your schedule.
To switch on a time table to the Time Event module
1. Click anywhere on the Time Events 1 window.
2. Choose Add Time Table and on the next popup menu select the TimeTable which to turn on
To switch off a time table from the Time Event module
1. Click anywhere on the Time Events 1 window.
2. Choose Remove and on the next popup menu select the TimeTable which to turn on.
Note:
1. You may add a command. It will be executed only once on the current date and the time you set.
 DVPlay LTD - the optimal quality solution for TV channels
Page 69