Download 602-0190-01

Transcript
SA Module Harness
2. Route the Steer In and Steer Out connectors from the rear of the machine towards the front of the vehicle along the left side
under the cab. See Figure 5-19.
Note: Keep the SA Module Harness on the inside of the cab support posts to provide the best protection.
Figure 5-19 Routing Steering Cables
SA Module Harness Cables
Cab Support
3. Route the Steer In and Steer Out connectors out from under the cab front left side. See Figure 5-20.
Figure 5-20 Routing Steering Cables Out Front
SA Module Harness Cables
52
AutoSteer System