Download User Manual RIGOL

System Requirements
To install and run UltraScope software, you must have an IBM-compatible PC with the
following installed:
z
Microsoft Windows 95, 98, NT 4.0, 2000, or Windows XP
z
16 MB RAM or greater recommended
z
CD-ROM drive, 4X or better
z
Super VGA monitor or better
z
10 MB of disk space
z
Available RS-232 COM port
You must have a DS1000 series oscilloscope and the firmware version must be higher or
equal to 01.02.22 . To connect to PC, the oscilloscope must install USB dirver or have an
available RS-232 COM port.
Copyright 2006 Rigol Technologies, Inc.
UltraScope For DS1000
4