Download disassembly

TOP
FOR SAFETY
DISASSEMBLY
18
DISASSEMBLY
FRAME HARNESS
1 Peel off the aluminum
tape (60X25) and
disconnect the connector,and
remove the three screws.
Then remove the MSBD
bracket and the CNX-264
board.
Route the two flexible
board through the
notch as shown.
Secure the flexible board
with the two UL tape.
To Flowchart
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver
Aluminum tape
(60X25)
3
1
2
2 Disconnect the connector
and remove the two
screws, and remove the
SW holder and the
SWX-174 board.
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver
2
1
PARTS LIST
!• CNX-264, SWX-174, RAY-CATCHER (VGC-V517G/V617G)
Tape attachment
positions
Aluminum tape
(60X25)
SWX-174
board
EXPLODED VIEW
2
3 Disconnect the connector
and remove the screw,
then remove the Raycatcher unit.
SW holder
MSBD bracket
3
CNX-264 board
– 21 –
Ray-catcher unit
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver