Download USER MANUAL SUPERVISOR 24/48/72

TOP AND BOTTOM SET :
In several applications it might be useful to adjust the overall maximum or minimum setting,
for instance if your running on a generator with an underrated power or working in the U.K..
with a supply voltage of 240V while your lamps are 220V. These adjustments do not influence the settings for
the "scan" selected channels.
To set the maximum output, go via the "setup" part of the menu tree to the screen "top set" and press "enter"
to select.
The screen now shows:
MAX OUTPUT 100% : By means of "up" and "down" a new value can be set.
Return to the tree by pressing "enter".
Return to the main screen by pressing "exit".
The minimum can be adjusted with the function "bottom set".
The screen now shows:
MIN. OUTPUT 00% : By means op "up" and "down" a new value can be set.
Return to the tree by pressing "enter".
Return to the main screen by pressing "exit".
©2002 IES BV Veenendaal
page
10-01-02
22