Download Installation manual - Becker

Preface
Using the installation manual
The installation manual describes the commissioning of Becker tubular drives for roller shutters and sun protection as well as the commissioning of specific Becker controls.
This manual is intended for technicians who have been trained by
Becker-Antriebe GmbH.
It is essential that you follow the safety instructions for the installation
and commissioning of tubular drives and controls on pages IV - V at
the end of the installation manual. Disregarding them can result in
serious injuries.
The installation manual does not replace the Assembly and Operating Instructions supplied with Becker products.
Always observe the information in the installation manual as well as
the Assembly and Operating Instructions supplied with the product
when operating or repairing the system. Becker-Antriebe does not
accept liability for damages or injury resulting from incorrect usage.
Subject to technical changes without notice.
II