Download User Manual Interroll DriveControl

DriveControl HC-EC100 / HC-EC110
Appendix
Manufacturer's declaration
in terms of the EC-Machine Directive 98/37/EC and its amendment 98/79/EC,
Annex II B
The manufacturer:
Interroll Engineering GmbH
Höferhof 16
D - 42929 Wermelskirchen
Germany
hereby declares with sole responsibility that the product range
•
•
•
DriveControl HC-EC100
DriveControl HC-EC100 Full
DriveControl HC-EC110
is not a ready-to-use assembly in terms of the EC-Machine Directive and
therefore does not fully comply with the requirements of this directive. It
must not be put into service until the machinery into which it is to be
incorporated has been declared to conform with the provisions of the
Machine Directive.
Applied EC Directives:
Machine Directive 98/37/EC and its amendment 98/79/EC
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
RoHS Directive 2002/95/EC
Applied harmonized norms:
EN ISO 12100 Part1 and Part2
Wermelskirchen, November 7th 2007
Armin Lindholm
(Managing Director)
(This declaration can be obtained at www.interroll.com, if needed.)
Version 1.2 (02/2009) en
Original language
49