Download User manual

User manual deltaflowC
10. Specification
Metering
Principle
Measured quantities
Span
Accuracy
Differential pressure with pressure and temperature compensation
Mass flow, temperature, static pressre
1:25
Standard type: Starting from 10% of low-flow span
High-accuracy: 2% Starting from 15% of low-flow
span respectively 4% starting from 7% of low-flowspan
Operating conditions
Media
Pressure
Temperature of Media
Ambient temperature
Material
Material enclosure
Burst Pressure
Probe length
Pipe sizes
Electrical connector
Power supply
Outputs
Degree of Protection
Gases, non-explosive / non-corrosive
10 bar
-80…250°C
-40…120°C
SS316Ti
SS316Ti, painted
16 bar
Max. insertion length 100mm
Starting from DN20 (2/3“)
4 terminal screws
18 – 36 VDC
1x 4…20mA (3-wire)
1x 0…10VDC
IP67
Table 2 Specification
systec Controls GmbH
Lindberghstrasse 4, 82178 Puchheim, Germany
Telefon +49-(0)89 - 80906-0, Telefax +49-(0)89 - 80906-200
info@systec -controls.de
http://www.systec-controls.de
Seite
Rev. 1.0 27.07.2011
21