Download MetPak Pro User Manual

Operation
3.4.2
MetSet Editing Screen
When connected correctly a MetSet editing screen is available to read
configuration settings, change configuration settings, save MetPak II configuration
settings to a PC file location, upload MetPak II configuration settings from a PC file
and view the MetPak II raw data string output,
MetPak Pro
Editing Screens
Move mouse over
exclamation or question
marks to read setting
comment
MetPak Pro
Device Setting
Options
View MetPak
Pro Raw Data
Output String
Return to
opening MetSet
Screen
Source of MetSet
Data
Firmware Version
and Unit ID
Serial Number
Connection Status
MetSet Connection Status Information.
Reading
Function
ONLINE
ONLINE in green indicates the MetPak Pro has been
successfully connected to MetSet.
OFFLINE in Grey indicates that MetSet is being used
without a MetPak Pro in communication with MetSet.
19200 COM 9
19200 is a report on the MetPak Pro Baud rate setting.
COM 9 is a report on the MetPak Pro COM Port connection
number.
2436 ‘METPAK PRO’
2.01 [Q] PV=2
Device: METPAK
PRO
Source:Device
2436 is the MetPak Pro Firmware number
2.01 is the firmware revision.
[Q] is the unit identifier.
PV=2 is the Protocol Version.
MetSet reports on the connected device (MetPak Pro,
MetPak II or MetPak II R)
MetSet reads ‘Device’ when the source of the data that
MetSet has retrieved has come from the MetPak Pro.
MetSet reads ‘File’ when the source of data has come from
a saved file.
MetPak Pro User Manual
© Gill Instruments Ltd
Page 42
Last Change
18 August, 2011