Download User Manual

WI-I/O 9-x Wireless Module
WI-I/O-EX-1-S-x Serial Module
User Manual v2.16
Analog Input Setpoints
WI-I/O 9-1_WI-I/O-EX-1- Configurable high & low set-points, allowing
S-1 AI 1 only
set/reset of remote digital outputs
WI-I/O 9-2_WI-I/O-EX-1S-2 AI 1-4
Analog Outputs
current sink to common
max loop voltage 27V,
WI-I/O 9-1_WI-I/O-EX-1- Resolution 15 bit, Accuracy 0.1%
S-1
Two 4-20mA
Resolution 12 bit, Accuracy 0.1%
WI-I/O 9-3_WI-I/O-EX-1S-3
Eight 0-20mA
System Parameters
Network Configurations
User Configuration
Diagnostics
On board diagnostics
Page 62
Communications via radio Up to 95 radio units with up to 32 serial units
or RS485 or network of off each radio unit
both
Any input to any output in RS232 PC or laptop
system
Automatic check on startup
Via RS232 terminal or
laptop
Input status
Output test
Incoming radio signal level
Simple radio path testing