Download User Manual

4-8
INSTALLATION
Installing the
motorized camera
VEO 600-MTZ
1. Find a suitable location to install the camera and power
supply.
2. Install the mounting brackets as required for your system.
3. Before mounting the camera, connect all cables to the
camera and power supply.
4. Install the linear rails (a) on the positioning track (b), which
is supplied with the gear rack (c) already installed for
motorized positioning.
Fig. 1
5. If using a cable chain, install the chain handling channel on
the mounting brackets (p. 4-6).
6. If applicable, install non-gear synchronization sensors.
7. If using a gear sensor, find the correct gear and location to
install the gear sensor.
8. Use the supplied mounting bracket and set the correct gap
distance. See Gear Sensor Installation beginning on
page 4-18.
continued
www.maxcessintl.com
Fife VEO 600
MI 2-272 1 A