Download User Manual - Stemmer Imaging

User Manual
Bobcat-640-GigE&CL Camera
Revision History
Issue
Issue date
Changes
000.01
10/10/2012
000.02
12/10/2012
000.03
31/10/2012
000.04
000.05
000.06
23/11/2012
30/11/2012
22/02/2013
000.07
07/06/2013
000.08
05/07/2013
000.09
06/09/2013
000.10
10/09/2013
000.11
15/10/2013
000.12
29/10/2013
000.13
15/11/2013
000.14
000.15
000.16
000.17
000.18
06/01/2014
14/01/2014
16/01/2014
30/01/2014
26/02/2014
000.19
28/02/2014
New document
Getting started chapter added and upgrade firmware
added
Tab 4.1: column added, chap. 4.2.1 Xenics TCP
Protocol: new, chap. 4.3: screenshots added, chap 5.1:
small update, chap 6.1: small update
Camera features and functions (chapter 8) updated
Chap. 4.5 Power Cable Diagram: new
Table 2.1: weight added
GigE and CL combined in 1 User Manual
Update Auto-exposure
New revision of appendix XFPA-640 control and
operation
Table 3.1 updated and put all lenses optional
New revision of appendix XSP protocol and appendix
Network connection set-up for GigE
Table 2.1 updated: weight
Appendices updated: put drawings together in 1
appendix
Specification table updated
CL interface: note added about the timing diagram,
new issue of Appendix XFPA-640 Control & Operation
Trigger warning added
Appendix Frame Rate Calculator added
Added new mechanical drawings
Specs updated
New appendix H: Histogram Equalization added
New issue of appendix XFPA-640 Control & Operation,
new issue of appendix Auto Exposure Control and
OPT-000062 deleted (Stingray)
Getting Started updated
New issue of appendix Histogram Equalization
First released issue
Appendix mechanical drawing updated (EASM file
removed)
Second released issue
001
11/03/2014
12/03/2014
21/03/2014
002
31/03/2014
000.20
Modified
by
CDU
CDU
CDU
JDS
CDU
CDU
JDS
CDU
CDU
CDU
CDU
JDS
CDU
CDU
CDU
JDH
CDU
CDU
CDU
JDS
CDU
CDU
CDU
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv
Ambachtenlaan 44
BE-3001 Leuven  Belgium
T +32 16 38 99 00
F +32 16 38 99 01
www.xenics.com
Doc Ref: ENG-2012-UMN020
Issue: R002
Date: 31/03/2014
XF-104_02/20-01-2012
Page 3 of 31