Download IP Phone 2007 User Guide

Connecting the components
Connecting the components
Before you begin
CAUTION
Damage to Equipment
Do not plug the IP Phone 2007 into a regular
telephone jack. This results in severe damage
to the IP Phone. Consult your system
administrator to ensure that you plug your set
into a 10/100BaseT Ethernet jack.
Connecting the components of the telephone
1. Connect one end of the handset cord to the handset jack (identified
with a handset icon) on the back of the telephone. Connect the other
end to the jack on the handset.
2. Choose one of the following connections:
a. For a telephone not sharing LAN access with a PC, connect one
end of the CAT5 line cable to the LAN Ethernet port located on
the back of the telephone (identified with a LAN icon). Plug the
other end of the CAT5 line cable into the IP network.
b. For a telephone sharing LAN access with a PC, connect one end
of the CAT5 line cable to the LAN Ethernet port located on the
back of the telephone (identified with a LAN icon) and the other
end to the IP network. Insert a second CAT5 line cable into the
PC Ethernet port located on the back of the telephone (identified
with a PC icon) and the other end into the Ethernet port of the
computer.
26