Download MTP830 S Feature User Guide

Transcript
2.19 One-Touch Button Feature
2.19 One-Touch Button Feature
To use One-Touch Button feature press and hold an assigned key to activate one of the following features:
Table 2-7
-
One-Touch Button Features
Feature
Description
Backlight
Switches backlight settings.
TMO Talkgroup Scan
Turns on/off the Talkgroup Scan feature in TMO Mode.
DMO / TMO Switch
Switches between TMO and DMO Mode.
Sending Status
Sends a dedicated status message to a dedicated address.
Flip Display
Rotates the display.
Change Talkgroup
Changes the talkgroup to the predefined by your service provider.
Hi/Low Audio
Activates high/low audio.
Sending User Defined Message
Sends a predefined/user defined template to a dedicated address.
Transmit Inhibit (TXI)
Turns on/off TXI Mode.
Private Call
Initiates a private call to a predefined entry in the contact list.
Phone Call
Initiates a phone call to a predefined entry in the contact list.
PABX Call
Initiates a PABX call to a predefined entry in the contact list.
Screen Saver
Turns on/off the Screen Saver feature.
Display Time
Shows time and date on a display.
Covert Mode
Turns on/off the Covert Mode.
Change Audio Profile
Changes the audio profile.
Howling Suppression
Toggles on/off Howling Suppression.
Man Down
Turns on/off Man Down feature.
Initiate Call-Out Fallback Alert
Sends Fallback Alert.
Previous Talkgroup
Switches the radio to the previously used talkgroup.
Display OPTA
Displays Operative Tactical Address.
Scroll Audio Profiles
Scrolls through all available audio profiles.
Direct Private Number Dialing
Initiates private number dialing editor.
Toggle RF Power Class
Toggles the RF Power High/Normal.
GPS Status Message
Sends your GPS location in a message to a dedicated address.
Connect/Disconnect RSM Earpiece
Connects/Disconnects RSM earpiece.
Repeater Mode
Turns on/off the Repeater Mode.
Default Settings
Resets all the radio settings to the default.
Speaker Enable / Disable Per Call
Enables speaker during the call.
Timed Talkgroup Change
Initiates the Timed Talkgroup Change feature. While in the
predefined talkgroup, it can be assigned to the second press function.
2-19