Download MTP830 S Feature User Guide
Transcript
2.19 One-Touch Button Feature 2.19 One-Touch Button Feature To use One-Touch Button feature press and hold an assigned key to activate one of the following features: Table 2-7 - One-Touch Button Features Feature Description Backlight Switches backlight settings. TMO Talkgroup Scan Turns on/off the Talkgroup Scan feature in TMO Mode. DMO / TMO Switch Switches between TMO and DMO Mode. Sending Status Sends a dedicated status message to a dedicated address. Flip Display Rotates the display. Change Talkgroup Changes the talkgroup to the predefined by your service provider. Hi/Low Audio Activates high/low audio. Sending User Defined Message Sends a predefined/user defined template to a dedicated address. Transmit Inhibit (TXI) Turns on/off TXI Mode. Private Call Initiates a private call to a predefined entry in the contact list. Phone Call Initiates a phone call to a predefined entry in the contact list. PABX Call Initiates a PABX call to a predefined entry in the contact list. Screen Saver Turns on/off the Screen Saver feature. Display Time Shows time and date on a display. Covert Mode Turns on/off the Covert Mode. Change Audio Profile Changes the audio profile. Howling Suppression Toggles on/off Howling Suppression. Man Down Turns on/off Man Down feature. Initiate Call-Out Fallback Alert Sends Fallback Alert. Previous Talkgroup Switches the radio to the previously used talkgroup. Display OPTA Displays Operative Tactical Address. Scroll Audio Profiles Scrolls through all available audio profiles. Direct Private Number Dialing Initiates private number dialing editor. Toggle RF Power Class Toggles the RF Power High/Normal. GPS Status Message Sends your GPS location in a message to a dedicated address. Connect/Disconnect RSM Earpiece Connects/Disconnects RSM earpiece. Repeater Mode Turns on/off the Repeater Mode. Default Settings Resets all the radio settings to the default. Speaker Enable / Disable Per Call Enables speaker during the call. Timed Talkgroup Change Initiates the Timed Talkgroup Change feature. While in the predefined talkgroup, it can be assigned to the second press function. 2-19